20 Mayıs 2013 Pazartesi

Quick Tip: Create a Cinematic “Sergeant America” Text Effect in Photoshop

Final Image

Quick Tip: Create a Cinematic “Sergeant America” Text Effect in Photoshop

Final Product:

Tutorial Assets

The following assets were used during the production of this tutorial.

Step 1

Make a new .PSD document; size 1000 x 500 pixels, RGB color, 100 dpi and grey background (color #33333). Create a new layer and fill it with a grunge metal texture. Now create the text using this font: American Captain. Use the settings shown in the following pictures. Set the character spacing to “80″. Now rename this text: “3D Base”. Then go in the menu Layer > Layer Styles > Blending Options and use these settings:

Step 2

Duplicate the text and rename it ” 3D Base BEVEL”. Right click on his layer and click to “Clear Layer Style” or in the Styles Palette click on the first style “Default style (None)” (It’s the same thing). In the Blending Options menu on the right set the fill to 20%. Then go in the menu Layer > Layer Style > Blending Options and use these settings:

Step 3

Duplicate again the text and rename it “Text Base”. Right click on his layer and click to “Clear Layer Style” or in the Styles Palette click on the first style “Default style (None)” (It’s the same thing). Now sets the character spacing on “100″ and move it as you wish, in order to create a 3D effect, as shown in the image below. Then go in the menu Layer > Layer Style > Blending Options and use these settings:

Step 4

Duplicate the text ” Text Base”. Right click on his layer and click to “Clear Layer Style”. In the Blending Options menu on the right set the fill to 20%. Now and use these settings in the menu Layer > Layer Style > Blending Options:

Step 5

Your text effect is completed. Now we have to create the other texts. Use the settings shown in the following pictures. Set the character spacing of the text above to “380″, and set the spacing of the text below to “800″. Then go in the menu Layer > Layer Styles > Blending Options and use these settings shown in the pictures. Finally click on the text below (Super Soldier) right click on “fx” in his layer and set the “Scale Effect Command” to 59%.

Quick Tip: Create a Bloody Text Effect in Photoshop Using Layer Styles

Final Product:

Tutorial Assets

The following assets were used during the production of this tutorial.

Step 1

First create a new .PSD document, 600 x 400 pixels in RGB mode, 72 DPI with WHITE background color. Now prepare your assets. Install the Gypsy Curse font into your computer and open the .PAT file. Before we start preparing our background Set your foreground color to #333333 and hit “ALT+DELETE” while the Background layer is selected. This will change the background color to dark grey.

Step 2

First we need to make a layer from background. To do this – right click on Background layer and choose “Layer from background” name it as you wish and hit OK. Now go to Menu > Layer > Layer Style > Blending Options and use the settings below. You can also access Blending Options with two faster ways. First and the fastest way is to double click on the layer in your layers menu. Other way is to right click on the layer in your layers menu and choose Blending Options. When you are done with all the settings below, don’t forget to hit “OK” in the Blending Options window.

Step 3

Now we can start making our text effect. First choose a type tool and change font to Gypsy Curse, size around 235 pt and anti-aliasing to Sharp. Now type your text somewhere in the center of the image. You can write any word, but in this tutorial I’ll use “BlOOD”. All letters except “L” uppercase.

Step 4

Go to Menu > Layer > Layer Style > Blending Options and use the settings below on your text. You can also use the quicker methods to access Blending Options from “Step 2″ of this tutorial. When you are done with all the settings below, don’t forget to hit “OK” in the Blending Options window! This is the main text layer and will do most of the effects.

Step 5

Now duplicate your text layer by selecting the text layer in layer menu and going to Menu > Layer > Duplicate layer and name it as you wish. Now go to Menu > Layer > Layer Style > Clear Layer Style as we will make different style for this layer. Finally, go to Menu > Layer > Layer Style > Blending Options and use the settings below on your text. You can also use the quicker methods to access Blending Options from “Step 2″ of this tutorial. When you are done with all the settings below, don’t forget to hit “OK” in the Blending Options window. This text layer will be above the 1st text layer in your layer menu.

Final Image

Tut’s Text

Final Product

Tutorial Assets

The following assets were used during the production of this tutorial.

Step 1

First create a new .PSD document, 600 x 400 pixels in RGB mode, 72 DPI with WHITE background color. Now prepare your assets. Install the Times New Yorker font into your computer and open the .PAT file.

Step 2

First, we need to make a layer from background. To do this, right click on Background layer and choose “Layer from background” name it as you wish and hit OK. Now go to Menu > Layer > Layer Style > Blending Options and use the settings below. You can also access Blending Options with two faster ways. First and the fastest way is to double click on the layer in your layers menu. Other way is to right click on the layer in your layers menu and choose Blending Options. When you are done with all the settings below, don’t forget to hit “OK” in the Blending Options window.

Step 3

Now we can start making our text effect. First choose a type tool and change font to Times New Yorker, size around 174 pt and anti-aliasing Sharp. Now type your text somewhere in the center of the image. You can write any word, but in this tutorial I’ll use “SCARY”. All letters uppercase.

Step 4

Step 5

Now duplicate your text layer by selecting the text layer in layer menu and going to Menu > Layer > Duplicate layer and name it as you wish. Now go to Menu > Layer > Layer Style > Clear Layer Style as we will make different style for this layer. Finally, go to Menu > Layer > Layer Style > Blending Options and use the settings below on your text. You can also use the quicker methods to access Blending Options from “Step 2″ of this tutorial. When you are done with all the settings below, don’t forget to hit “OK” in the Blending Options window! This text layer will be above the 1st text layer in your layer menu. It will just add the dark shadow to the final result.

Final Image

3D Text | CINEMA 4D Tutorial

rofessional 3D text Cinema 4D | Tutorial [HD]

How To Create Sweep Nurbs In Cinema 4D

Photoshop Watercolor Painting Effect

Written by Steve Patterson. In this Photoshop effects tutorial, we’re going to learn how to easily make a photo look more like a watercolor painting. This photo effect works best on images where maintaining rich colors and strong contrast is more important than keeping any fine details, since you’ll be losing a lot of detail with this effect.

Creating the effect is as simple as duplicating some layers, applying a few filters, and using a few different layer blend modes, and the whole thing takes only a couple of minutes from start to finish.

Here’s the image I’ll be using for this tutorial:

The original photo.

And here’s how it will look after applying our watercolor painting effect:

The final watercolor painting effect.

Let’s get started!

Step 1: Duplicate The Background Layer Three Times

With the image newly opened in Photoshop, if we look in our Layers palette, we can see that we currently have one layer, the Background layer, which contains our image:

The Layers palette in Photoshop showing the image on the Background layer.

We need to create three copies of the Background layer, so use the keyboard shortcut Ctrl+J (Win) / Command+J(Mac) three times to duplicate the Background layer three times. If we look again in our Layers palette, we can see that we now have four layers, with the original Background layer on the bottom and three copies above it:

Press “Ctrl+J” (Win) / “Command+J” (Mac) three times to duplicate the Background layer three times.

Step 2: Turn Off The Top Two Layers

On the far left of each layer in the Layers palette, you’ll see a small eyeball icon. This is the Layer Visibility icon, and it determines whether or not the layer is currently visible in the Photoshop document. When the eyeball icon is visible, it means the layer itself is visible. Click on the icon for the top two layers in the Layers palette to temporarily hide them from view inside the document. When you click on the icon, it disappears, letting you know that the layer is no longer visible:

Hide the top two layers in the document by clicking on their Layer Visibility (eyeball) icons. The icons disappear when clicked on.

Step 3: Select “Layer 1″

With the top two layers temporarily hidden from view, click on “Layer 1″ in the Layers palette to select it. You’ll know which layer is selected because the currently selected layer is highlighted in blue:

Click on “Layer 1″ in the Layers palette to select it.

Step 4: Apply The “Cutout” Filter

The first thing we’re going to do is simplify our image, and we can do that using Photoshop’s “Cutout” filter. With “Layer 1″ selected, go up to the Filter menu at the top of the screen, choose Artistic, and then choose Cutout.

When the Cutout filter’s dialog box appears, set the Number of Levels to 4, Edge Simplicity to 4, and Edge Fidelity to 2:

Go to Filter > Artistic > Cut Out and change the options circled in red above.

Click OK when you’re done to apply the settings and exit out of the dialog box.

Step 5: Change The Blend Mode Of “Layer 1″ to “Luminosity”

With “Layer 1″ still selected, go up to the Blend Mode options in the top left of the Layers palette. By default, layers are set to the “Normal” blend mode. Click on the down-pointing arrow to the right of the word “Normal” and select the Luminosity blend mode from the bottom of the list:

Change the blend mode of “Layer 1″ from “Normal” to “Luminosity”.

Your image should now look something like this:

The image after changing the blend mode of “Layer 1″ to “Luminosity”.

Step 6: Turn On The Layer Above “Layer 1″ And Select The Layer

Still in the Layers palette, click inside the empty square where the eyeball icon used to be on the layer directly above “Layer 1″ (“Layer 1 copy”) to turn that layer back on, so it’s visible again inside the document. Turning a layer back on doesn’t actually select the layer though, and we need to have it selected as well, so once you’ve turned the layer back on, click anywhere else on “Layer 1 copy” to select it so it’s highlighted in blue:

Click on the visibility icon (the empty square) for “Layer 1 copy” to turn it back on, then click anywhere else on the layer to select it.

Step 7: Apply The “Dry Brush” Filter

We’re going to add some texture to our image at this point. With “Layer 1 copy” selected and visible once again inside the document, go back up to the Filter menu at the top of the screen, choose Artistic once again, and this time, choose Dry Brush. When the Dry Brush filter’s dialog box appears, set the Brush Size to 10, the Brush Detail to 10, and the Texture option to 3:

Go to Filter > Artistic > Dry Brush and change the options circled in red above.

Click OK when you’re done to apply the filter and exit out of the dialog box.

Step 8: Change The Layer Blend Mode To “Screen”

With “Layer 1 copy” still selected, go up to the Blend Mode options once again in the top left of the Layers palette, click on the down-pointing arrow to the right of the word “Normal”, and change the blend mode for the layer to Screen:

Change the blend mode of “Layer 1 copy” to “Screen”.

Your image should now look something like this:

The image appears brighter after changing the blend mode of “Layer 1 copy” to “Screen”.

Step 9: Turn On The Top Layer And Select It

Just as we did with “Layer 1 copy” a moment ago, click inside the empty square where the eyeball icon used to be on the top layer in the Layers palette (“Layer 1 copy 2″) to turn the layer back on and make it visible once again inside the document. Then click anywhere else on the layer to select it so it’s highlighted in blue:

Turn the top layer back on by clicking on its Layer Visibility icon in the Layers palette, then click anywhere else to select the layer.

Step 10: Apply The “Median” Filter

With the top layer selected and visible again inside the document, go back up to the Filter menu at the top of the screen, this time choose Noise, and then choose Median. The Median filter will remove even more detail from the image, and the nice thing about it is that it does so without blurring the image so edges remain well defined. When the Median Filter’s dialog box appears, set the Radius value at the bottom to 12 pixels:

Go to Filter > Noise > Median and set the “Radius” value to “12 pixels”.

Click OK when you’re done to apply the filter and exit out of the dialog box.

Step 11: Change The Blend Mode Of The Top Layer To “Soft Light”

To complete the effect, with the top layer still selected, go up to the Blend Mode options in the top left of the Layers palette, click again on the down-pointing arrow to the right of the word “Normal”, and change the layer’s blend mode to Soft Light:

Change the blend mode of the top layer to “Soft Light” to complete the effect.

Once you’ve changed the blend mode to “Soft Light”, you’re done!

Here’s my original image once again for comparison:

The original image once again.

And here, after applying the Median filter to the top layer and changing its blend mode to “Soft Light”, is my final “watercolor painting” effect:

The final watercolor painting result.

And there we have it!